Select language | Seleccionar idioma:     
 
     
| HOME | COMPANY | PRODUCTS | CONTACT |       
 
 
     
 
 GENERAL CHARACTERISTICS
 
     
  Automatic press adapted for the operation of redrawing. There are two different types of these presses:  
 

.

 
 

 Redrawing Press PRE 40

Consists of a double frame press with pneumatic introduction, centring and ejection system.

This press includes a dual central lubrication system (oil and grease)

The RAM  slides over easy-adjustment parallel guides.

 
     
 
 
 
PRE 40
 
 
 
 

Redrawing Press PRI 40

It is a double frame press with servo-mechanical introduction and ejection of cans and caps, by means of a transfer system.

This press includes central lubrication system.

The RAM slides over pre-loaded rollers.

Both presses include an easy access, easy maintenance and easy resetting back pneumatic cushion with a pressure multiplier.
 
     
 
 TECHNICAL CHARACTERISTICS
 
     
 
 TYPE  
PRE 40
PRI 40
 Potencia / Force
KN
400
400
 Carrera / RAM Stroke
mm
140 - 220
140 - 220
 Máx Nº de golpes/ Nº Strokes max.
p/min
110
150
 Embutición máx. / Max. drawing depth
mm
75
75
 Distancia entre montantes / Distance between columns
mm
700
1750
 Producción máx* / Max. Output* 1 out
min
110
150
2 outs
220
300
3 outs
330
450
4 outs
-
600
 Sistema alimentación / Feeding system  
Aire / Air
Transfer

 * Dependiendo del diámetro de corte, calidad, tamaño y barnices de la hojalata.
 * Depending on the cutedge diameter, tinplate quality, size and varnishing

 
     
     
 
| Home | Company | Products | Contact |