Select language | Seleccionar idioma:     
 
     
| HOME | COMPANY | PRODUCTS | CONTACT |       
 
 
     
 
 GENERAL DESCRIPTION
 
     
  There are two different types of presses available:  
 

 

 
 
 The Strip feed press PA 40 is a C frame inclined press suitable to produce any kind of ends such as round, oblong or oval, with the possibility of single or double die set.

It includes an automatic strip feeder allowing between 4 and 16 strokes per strip and with a double sheet detector.

Ends or caps are ejected be means of a mechanical system. The strip-skeleton is expelled by rollers driven by a pneumatic cylinder.

The RAM slides over four bearings with preloaded linear needles; it keeps the RAM adjusted for several years without readjustments needed.

 
     
 
 
 
 
 
 

 The Strip feed press PAE63 is a C frame inclined press suitable to manufacture any kind of cups or drawn bodies. It can work with a single or a double die and includes an automatic strip feeder allowing between 4 and 16 strokes per strip and with a double strip detector.

Cans or caps are ejected by means of a pneumatic system. The strip-skeleton is expelled by rollers driven by a pneumatic cylinder.

The RAM  slides over  hardened, scraped and rectified  guides under automatic lubrication.

It includes a high-speed   double action valve.

Both presses include an easy access, easy maintenance and easy resetting back of pneumatic cushion which incorporates a pressure multiplier system.